Va Cnt Synthesis And Va Cnt Membrane Fabrication Procedures

VA CNT synthesis and VA CNT membrane fabrication procedures were followed from the protocols of our previous study [28]. VA CNT synthesis was based on the water vapor assisted chemical vapor deposition (CVD) process. VA CNTs were grown on a Fe (1.5 nm)/Al (15 nm)/Si wafer. After the coating, the Si wafer was cut into rectangular chips, with the dimension of 9 mm width and 9 mm length, and the chopped chips were inserted in a cylindrical electric furnace of a CVD machine. Carbon source was high-purity ethylene gas (99.99%) at a flow rate of 100 sccm (standard cubic centimeters per minute indicating cc/min at a standard temperature and pressure). Argon (99.999%) was used as the carrier gas at a flow rate of 300 sccm. Hydrogen gas (99.999%, 200 sccm) and water vapor (50 sccm) by argon purging were added to the gases stream. Reaction was performed at 750 Â °C for 40 min. The interstitial space between the synthesized VA CNTs was filled in a mold with CRP 7005B urethane monomer (TL, Yongin, Korea) and ethanol in a volume ratio of 3:7. Ethanol was used as the densification agent and inducer for urethane monomer filling the interstitial space between CNTs. After infiltration, CRP 7005B monomer was crosslinked in the interstitial space of CNTs at 40 Â °C for 12 h. After the crosslinking, the top and bottom of the CNT membrane were cut by a microtome to open the CNT’s caps, and the membrane edge was extended by additional crosslinking by different urethane monomers (UC-40 A, B, Cytec,

Military Historians And Theorists Postulate That Napoleon...

Many military historians and theorists postulate that Napoleon invented modern warfare. This belief is not true. Although there are aspects of how Napoleon fought that are used by many modern armies today, and his tactics and philosophy of fighting should continue to be studied, Napoleonic warfare is not fundamentally similar to modern warfare. Napoleon implemented ideas that modern armies use today; however the Revolutions in Military Affairs (RMAs) of the Franco-Prussian Wars and American Civil War, and the military revolutions of World War I, and the Nuclear Age dictate to a greater degree how modern warfare is practiced. Military officers around the world still study Napoleon, but that does not mean that he and his style of warfare invented modern warfare. Napoleon is still relevant today because those that studied him such as Clausewitz and Jomni were able to distil Napoleon’s Operational Art which is very relevant to military commanders and strategists today. Napoleon al so introduced to Europe and the world how to build, maneuver and effectively use large armies, corps and echelons higher, and how to motivate soldiers. (take from The Rise of Napoleon). However, Napoleon and his adversaries still fought battles, not in combat, which is continues conflict that stretches for weeks and months. No new innovations came from Napoleonic warfare. He and his rivals still used similar weapon systems and tactics. Napoleon’s genius and success lay in his ability to maneuverShow MoreRelatedContemporary Issues in Management Accounting211377 Words   |  846 Pagesacademic spheres in accounting, I sense that the two worlds have less and less to do with one another. It is therefore ever more important to reflect on the contributions which Michael Bromwich has made. He played an important role in the diffusion of modern practices of capital investment appraisal in the United Kingdom. He has been constantly open to the insights which advances in economic the ory can provide into the accounting art, in many areas pushing at the frontiers of international knowledge inRead MoreStrategy Safari by Mintzberg71628 Words   |  287 Pagesacross countries, authors, and problems with remarkable skill. At one point, she wrote in an e-mail, I think it s pretty awesome that I am communicating with a Franco-Anglo-Canadian in India about a book being published in the U.S. and Europe Ahhh, modern life. Particularly wise and helpful were comments on the manuscript provided by Joelle Meiic. Thanks also go to the doctoral students of Henry s colloquium in Montreal, who made a number of helpful suggestions, and to Maeve Quaid, Doug Torgerson

Sample Resume Persuade Management - 991 Words

B) Brief to convince management: Sir! I have certain matters to discuss which we are facing from last 6 months. I have evaluated our induction policy and procedures and found certain lacking which if corrected can be helpful for the betterment of our system. Sir, first of all our induction policy and procedure was last updated 10 years ago, due to such a large period of time, we are now facing several problems regarding our inductions and there is a clear need for the policy to be amended.Below are the recommendations which I think, if considered shall be helpful for the betterment of our system to a greater extent. †¢ We do not prescreen applicants.An half hour phone call can save hours of our organization s time. Pre-screening†¦show more content†¦Ã¢â‚¬ ¢ The interviewers in the past have concentrated on communication skills and personality. This is the reason that some of our current employees lack the technical skills required for their respective position. Some of the employees in the selection panel shall concentrate on assessing the applicants’ technical skills. †¢ We have failed to prepare the candidates for the interviews in the past.If our applicant fails to ask about our company and the specifics of the job for which he or she has applied, we need to help the applicant out. We need to prepare our applicants better for the interview, so interviewers spend their time on the important issues: determining the candidate s skills and fit within our culture. We need to prepare the candidate by describing the company, the details of the position, the background and titles of the interviewers, and whatever will eliminate time wasting while the candidate interviews within our company. †¢ Spending too much of the interview explaining the requirements for the position. The requirements of the position shall properly be explained to the applicants through a properly drafted email. †¢ We do not have a practice of providing interview feedback to the rejected employees. Candidates that genuinely want to work for us will have put in the time to thoroughly research our company, research the role, the interviewers and will be brushing up on

The Miraculous Journey Of Edward Tulane - 900 Words

â€Å"Once, in a house on Egypt street, there lived a rabbit who was made entirely of China†¦Ã¢â‚¬ (DiCamillo 1). These are the seventeen short words that began my obsessive love for literature. An insignificant sentence from the first book I read on my own, The Miraculous Journey of Edward Tulane, influenced me to fall in love with the art of reading and writing. After reading this incredible piece of work, I desired to further my knowledge in all types of literature. In search of more information, I came across another book I rather enjoyed, although this book was a bit different. A poetry book was my newest influence on my artistic yet newly developing writer’s voice. I adored the way the sentences structured and random words rhymed, everything from the alliterations and allusions to the heart stopping dramatizing cadences. I loved the way the poetic words just flow through the mind like waves flowing through the smooth ocean water. It became my inspiration for future greatness. I was no longer just reading the poetry I had come to love, but also writing it. I was creating my own waves of symbolic literature on the paper. The words seemed to fall into place as if I was meant to write my many perspectives on the unmarked paper. The pages did not maintain their blank disguise for long due to my constant need to fill them with my thoughts, emotions, stories, and everything else going through my mind. These words meant nothing to the people around me, but to me, they meant everything.Show MoreRelatedLanguage Arts Topic : Micro Teach Character Identification938 Words   |  4 Pagesworld’s fastest woman, Because of Winn-Dixie, The Miraculous Journey of Edward Tulane, The Tale of Despereaux. Materials: Character traits posters, dry-erase markers, and list of characteristics of character from each book. Students: Reading group book, dry-erase marker, character traits list. Anticipated Length of Learning Experience: 1 hour Student Grouping: Students will be divided into their reading groups; The Miraculous Journey of Edward Tulane group will be divided into two groups. Each groupRead MoreToday is the day we have all dreamed about, sat around for many late nights wondering when this600 Words   |  3 PagesToday is the day we have all dreamed about, sat around for many late nights wondering when this time would come. Today we leave behind The University of South Florida community and start our ever-long journey, our miraculous journey into the start of our careers and futures. We have become a tight-knit family together, sharing laughs, tears, and memories. As a student you were asked to learn, calculate, and memorize hundreds of facts and concepts for test and quizzes during all your academic yearsRead MoreVideo Workshop : Subjects Matter Essay1553 Words   |  7 Pagesknowledge about animals, however, we do have a few less than motivated learners. The variety of lesson presentation is meant to help engage those learn ers. Currently, this 4th grade class is reading â€Å"The Miraculous Journey of Edward Tulane,† by Kate DiCamillo, which is a story about a china rabbit and his journey across several decades, although he is not actually an animal but a doll, there is some connection there. Each child has their own personal experiences with certain types of animals, as well as their

The Importance Of A Relational Database Management System

We know that a Relational Database Management System is required for manipulating data in an efficient manner. Therefore, many applications and web servers adopted this technology for storing, retrieving and manipulating their data. This system was working well until the advent of Big Data. From the early 21st century when the web data started growing in an exponential way, the conventional RDBMS system were unable to cope up with the advancement of this huge data traffic. Therefore, developers were started to find a different way to sort out the upcoming disaster and that gave the birth of NOSQL. 1. What is NoSQL NoSQL is a database technology developed to overcome the limitations of the Relational Database technology that to match the rhythm with modern web applications. NoSQL refers non-SQL or non-relational and doesn t support ACID(Atomic, Consistent, Isolated and Durable) Properties. This technology is developed to cope with Big Data which is measured in petabytes. The common factors which are considered for adopting the NoSQL system are Big Data, Big Users, Cloud Computing and the Internet of Things (IOT). 2. Architecture of NoSQL If we dig deep we will see that selecting a NoSQL system can become difficult if you don t have adequate knowledge of the data type you are about to use in your project. There are four types of data models available in NoSQL system, Key-Value store, Document Store, Tabular Store and Object Store. I am giving a brief description of eachShow MoreRelatedImportance of the Study of Database Technology1488 Words   |  6 Pagesï » ¿Importance of the Study of Database Technology Introduction The importance of creating a database is the creation of a quality list containing the fields needed to sort and send relevant and timely messages to customers who desired to be contacted. Database creation requires that several questions are answered including: (1) who is the customer; (2) what would be the best thing I could do to assist the customer? (3) What information will aid in assisting the customer? (Nandagoaoli, nd) I. DatabaseRead MoreInformation Storage And Management System1373 Words   |  6 Pagestechnology, information storage and management have been vital of importance. Information effectiveness and efficiency are determined by how well data is organised and processed. The term ‘data’ have been widely employed in different human activities, including science, business, education, law and the like. Here, data is a means for representation of facts, concepts, and instructions in order to communicate (Sumathi Esakkirajan 2007). Nevertheless, if data management is ineffective, and relevant informationRead MoreThe Type Of Technology Necessary For Accurate Crime Analysis921 Words   |  4 PagesI will provide details for the type of technology necessary for accurate crime analysis. I will explain at least four methods of collecting, storing, and retrieving information needed for crime analysis. I will provide examples to support the importance of each method selected. In con clusion, I will detail the benefits of crime analysis to the community. Crime analysis is a tactic that police officers need in order to enhance their prevention, investigation, and apprehension skills (Foster, 2013)Read MoreUnit 17 - Database Design Concepts1192 Words   |  5 PagesUnit 17 – Database Design Concepts a) Write and describe a variety uses organisations make of use of databases and the issues they face - P1.1 Integrity of data Data integrity refers to preserving and promising the accuracy and consistency of data over its entire life-cycle. It is also the critical aspect to the design, implementation and usage of any system. This system can store, process or retrieve data. Data integrity can be negotiated in a number of ways that include: †¢ Human errors when dataRead MoreIntro to Database Systems Chapter 1 Essay1016 Words   |  5 Pagescharacteristics without affecting the application program’s ability to access the data. It standalone data so it doesn’t need to be link with anything. (pg. 15) 4. DBMS is a collection of programs that manages the database structure and controls access to the data stored in the database. It helps manage the cabinet’s contents (pg. 7) 5. Structural independence is when it is possible to make changes in the file structure without affecting the application program’s ability to access the data. (pgRead Moredatabase management system and information retrieval system1100 Words   |  5 PagesDifferentiate between database management system and information retrieval system by focusing on their functionalities. A database management system in the main software tool of the database management approach because it controls the creation, maintenance, and use of the database of an organization and its users. The three major functions of a database management system are first to create new database and database application. Second to maintain the quality of the data in an organized database. And last toRead MoreImpact Of Big Data On Business Decisions1138 Words   |  5 PagesIntroduction Since the 1970’s databases and report generators have been used to aid business decisions. In the 1990’s technology in this area improved. Now technology such as Hadoop has gone another step with the ability to store and process the data within the same system which sparked new buzz about â€Å"big data†. Big Data is roughly the collection of large amounts of data – sourced internally or externally - applied as a tool – stored, managed, and analyzed - for an organization to set or meetRead MoreAn Object Relational Database Management System1371 Words   |  6 PagesINTRODUCTION An object-relational database management system (ORDMS) is a DBMS that supports both relational and object-oriented functions. SQL:1999 seems like the most innovative update to the language since its induction, largely because of the adoption of object-oriented related upgrades. COLLECTION TYPES â€Å"A collection is an ordered group of elements, all of the same type.† (Oracle 2002) With this addition it became possible to use set operators which allows for a single result from two queriesRead MoreBenefits of a Database Information Gathering Techniques1090 Words   |  5 PagesBenefits of a Database amp; Information Gathering Techniques Ian Keller Strayer University Introduction to Relational Database Management Systems CIS 111 Professor Jonathan C. Thrall April 26th, 2012 Databases are very important to every person in the world today. Whatever you do in you daily routine you are bound to come in contact with some form of database and our world has become so dependent on it that most people won’t even realize the importance of databases. A database is a bunchRead MoreE Commerce : A Storage Environment1025 Words   |  5 PagesWe use database in our everyday life and some of the common uses of databases are given below: †¢ Personal Cloud Storage: When in our any type of storage device like a phone or a tablet we are saving documents like a photo or an audio file we are saving it in a cloud. Now the cloud here is a storage environment presented to us by syncing data through a powerful database, we not only store data but can call the data anytime and retrieve it. †¢ Social Media: User information is required by every social

Precision Agriculture in Australia-Free-Samples -Myassignment

Question: Demand and Supply of certain resources (LNG, Natural Gas, Energy, Coal etc) in Australia. Answer: Introduction Agriculture industries is one of key industries in Australia as it contributes to about 12% share of this nations Gross Domestic Product (GDP). This industry in Australia produces huge variety of primary goods for export as well as domestic consumption. This report focuses on the reforms in agriculture industries in Australia over the decades. For the past three decades, the main feature of this nation approach in enhancing productivity has been to bring about change in agriculture and decrease distorting manufacturer support (Bramley and Trengove 2013). Historically, the Australian government employed several support measures in maintaining as well as stabilizing farmer returns in this sector. This study also highlights on the role of Australian government in bring about reforms in agricultural sector. The economic analysis presenting the issue is also discussed in this report. Role of Australian government in reforms in agricultural Industries The Australian government plays a major role in bringing about reforms in the agricultural industries. The policy makers of this nation have recognized the significance of rising agricultural productivity sustainably as it enhances long-term income as well as welfare. For this reason, they took interest in implementing programs for achieving this goal without distorting the markets (Fuglie et al. 2012). These programs that supports diversification, encourages investment and refines their business skills have improved their farmers ability in enhancing their business. The Australian government actively works in reducing distortions in worlds agricultural trade in order to give better access in the market for the Australian exporters. Both the farmers as well as the Australian government establishes research and development (RD) corporations for each agricultural industries (Willer and Lernoud 2016). The government contribution to RD bodies helps them in researching about new farming m ethods, which in turn improves productivity and adaptation to change in climate. The Australian government is mainly interested in bringing change in agricultural industry as this sector plays bigger role in exporting products and services and contributes in national income and employment. Economic analysis about presenting the issue Reforms of agricultural policies in Australia started in 1970, when the government sought in limiting the financial assistance given through the budgetary measures. Early reforms introduced stabilized prices in agricultural goods and placed larger emphasis on providing assistance. Subsequent change aimed in making decision-making highly responsive to the market forces and decreased the level of assistance within the industry. The reforms in Australias agricultural sector include reduction in tariff, wider protection measures and removal of subsidy in fertilizer consumption. Tariff refers to tax on exports or imports of goods between the sovereign states. The government imposes tariff for restricting trade as it increases the prices of imported products, making them highly expensive to the consumers. Therefore, reduction in tariff led to growth of agricultural goods that are to be traded. Hence, it also led to creation of trade in this nation. Subsidy is termed as the benefits that the government offers to the individuals or industries in different forms including welfare payment, allowance of tax keeping low prices of products etc. Removal of subsidy in fertilizer consumption helped the Australian government in saving huge amount of money (Rickards and Howden 2012). In addition, the Australian government also imposed education programs to the farmers including marketing, strategic planning, production management and resource management. As a result, it improved the business skills of the farmers leading to increase in productivity. These reforms not onl y enhanced productivity growth but also reduced the production cost as well as cost of doing business. It also removed distortions in product price and increased exposure to huge competition (Hochman et al. 2013). Furthermore, the imposition of less foreign investment restriction in agriculture led to growth of agricultural industries. This occurred due to increase in inflow of capital arising from the foreign investment. This led to development of agricultural industries of this nation. Furthermore, the present agriculture polices shows that the Australian government does not provide support of market price to producers. Figure 1: Assessment of support to Australian agriculture Source: (Oecd.org 2017) As total productivity increased due to reform in agricultural industries, it enhanced the GDP growth rate of Australia. GDP refers to the monetary value of the final commodities and services manufactured within the geographical boundary of the nation in specific time frame. Therefore, increase in GDP growth rate signifies better economic health of the nation. Figure 2: The GDP of Australia from Agriculture Source: (tradingeconomics.com 2017) Recommendation of actions to the policyholders As the Australian government plays vital role in changing their agricultural industries, certain recommendation on the actions to be taken by the policymakers is given below: The Australian government should take effectual account on the requirements as well as decision-making procedure of the farmers and must also ensure flexibility in adaption programs in order to satisfy their farmers (Sheng et al. 2015). It is suggested that the key holders should adapt more research techniques for mitigating greenhouse gas emission from this agricultural sector. The policymakers in response to problems impacting agriculture should increase their investment as well as support for adapting further research methods into efficiency in energy in this industry especially, biofuels, biochar etc. It is recommended that the key holders should establish operating station network within this nation and must also regulate compatibility between various GPS systems. The government should also invest in local organizations that are engaged in work of farmers in acclimatizing to variability in climate. The policymakers must also develop policy for evaluating innovation range in order to enhance the resilience as well as productivity of the organizations. Conclusion Reforms in agricultural industries enhanced GDP growth and employment rate of Australia. Implementation of policies by the Australian government also helped the farmers in improving their skills in business. However, the Australian farmers became highly productive and influential in giving up protection of government. In addition, the Australian government also supported their farmers in managing price risks in the markets. Therefore, it can be concluded that reforms in this sector expanded this industry and improved the financial condition of the farmers. References Bramley, R. and Trengove, S., 2013. Precision agriculture in Australia: present status and recent developments.Engenharia Agrcola,33(3), pp.575-588. Fuglie, K.O., Wang, S.L. and Ball, V.E. eds., 2012.Productivity growth in agriculture: an international perspective. CABI. Hochman, Z., Carberry, P.S., Robertson, M.J., Gaydon, D.S., Bell, L.W. and McIntosh, P.C., 2013. Prospects for ecological intensification of Australian agriculture.European Journal of Agronomy,44, pp.109-123. Lawrence, G., Richards, C. and Lyons, K., 2013. Food security in Australia in an era of neoliberalism, productivism and climate change.Journal of Rural Studies,29, pp.30-39. Oecd.org. (2017). Cite a Website - Cite This For Me. [online] Available at: https://www.oecd.org/tad/events/Mr.%20Merrilees_Agricultural%20productivity%20growth%20reforms%20opportunities.pdf [Accessed 30 Nov. 2017]. Puri, M., Abraham, R.E. and Barrow, C.J., 2012. Biofuel production: prospects, challenges and feedstock in Australia.Renewable and Sustainable Energy Reviews,16(8), pp.6022-6031. Rickards, L. and Howden, S.M., 2012. Transformational adaptation: agriculture and climate change.Crop and Pasture Science,63(3), pp.240-250. Sheng, Y., Zhao, S., Nossal, K. and Zhang, D., 2015. Productivity and farm size in Australian agriculture: reinvestigating the returns to scale.Australian Journal of Agricultural and Resource Economics,59(1), pp.16-38. Tradingeconomics.com. (2017). Australia GDP From Agriculture | 1974-2017 | Data | Chart | Calendar. [online] Available at: https://tradingeconomics.com/australia/gdp-from-agriculture [Accessed 30 Nov. 2017]. Willer, H. and Lernoud, J., 2016.The world of organic agriculture. Statistics and emerging trends 2016(pp. 1-336). Research Institute of Organic Agriculture FiBL and IFOAM Organics International.

Business Information Systems of RFID Samples †MyAssignmenthelp.com

Question: Discuss about the Business Information Systems of RFID. Answer: Introduction Radio Frequency identification is a widely used technology for tracking assets or identifying them. RFID can be termed as small electronic device with a small chip and an antenna. The RFID devices is very similar to that of barcodes and QRCODES. The technology uses electromagnetic fields for identifying and tracking the tags attached with the objects. The report discusses the technology of RFID and its limitation. It further discusses the technical problems the technology is designed to solve and the prospects for the success of technology in the marketplace. How RFID works? Radio Frequency identification number makes use of the radio waves to detect and collect the information of the RFID enabled devices. Thus, this technology does not require any human intervention in data collection and analysis. The different components of RFID include a RFID tag, a tag reader and an antenna that sends signals from the device incorporated with RFID tags (Zhu, Mukhopadhyay Kurata, 2012). The tag reader converts the radio waves into a usable data form. There are mainly two types of RFID systems, active and passive RFID. The passive RFID system makes use of the tags that have no internal power source and is powered by the electromagnetic energy transmitted from the RFID reader. Active RFID systems on the other hand have three parts, which includes a reader, an antenna and a tag. The main feature of the active RFID tag is that, it possesses its own power source (Jia et al., 2012). This power source is an internal battery that has long read ranges and large memory banks. The active tag is needed to be replaced when the battery of an active RFID die. Active RFID tags are generally used as bacons to track the real-time location of the assets such as tolling. Since the active tag uses battery powered RFID tags, they have much longer read range than passive tags. However, active tags are more expensive than passive tags. The business and technical problems solved by RFID RFID technology makes the process of tagging and locating inventory even more easier that reduces the cost of manual tagging of the goods and increases the accuracy of sales. It is widely used in business ad RFID chips are an improved replacement of the hand tags that are more complex to handle. RFID tags helps in keeping a track of the inventory objects thus reducing the number of out of the stock products. The main advantage of using RDIF tags over hand tags is that, it removes the need of human intervention in maintaining and tagging the goods (Zhong et al., 2015). This is beneficial for business as it reduces the need of employees to a considerable amount. RFID is an advancement form of the barcodes and QRCODES. The differences among the RFID tags, barcodes and QRCODES are elaborated in the following table- RFID BARCODE QRCODE RFID or radio frequency identification number reads and locates data by making use of the electromagnetic waves. Since RFID is more improved than QR and barcode, a proper technological knowledge is required for handling the RFID tags. However, a proper training can simple help in achieving this (Dwivedi et al., 2013). The initial cost of implementation of RFID tag is high as it requires expensive scanning devices in order to scan the RFID tags. The barcode is similar to RFID as it is an effective data collection technique. However, the process of data collection in barcode is very different from that of RFID or QRCODE. The reading rate of barcodes is very slow compared to RFID and QRCODE as it can read only one data at a time. Furthermore, barcodes have no capability to uniquely identify any item and hence it is rarely used nowadays. QRCODE is used to store information that can only be read with the help of a QR reader. Cost of implementation of QR code scanning is low as compared to RFID as the QR devices can be scanned with the help of camera-equipped devices (Barrera, Mira Torroba, 2013). RFID-Technological Limitations The limitations of RFID technological limitations are as follows (Expsito Cuias, 2013)- The implementation cost of RFID is very high and therefore it may not be a feasible for small business. The tagging and tracking of low cost materials and goods may not be feasible with the use of RFID tags. There is certain security issues associated with the implementation of RFID No proper RFID standard has been set yet, which is one of the major limitations of the RFID technology. Another limitation of RFID is physical limitation, which includes reading through liquid or metals. Organizational Implementation of Cloud The famous retailing sector Wal-Mart is relying on the RFID technology for their normal business operations. Walmart implemented this technology in the supply chain in order to increase the visibility of information or inventory. Walmart has developed into the largest retailer of the world by making use of every opportunity in streamlining the supply chain. The organization had planned the implementation of RFID back in 2003 and the implementation of RFID has brought a transformation in the way, Walmart runs the retail store. The movement of the goods across the supply chain is tracked with the help of the information sent by the RFID reader. Therefore, it has helped the organization in managing the supply chain in a more effective way (Shin Eksioglu, 2014). Furthermore, it Walmart uses the radio frequency tags for keeping the shelves stocked. The RFID tags provide real time information about the store shelves. RFID in the marketplace Use of RFID is wide in the retail market place. It finds its use in the anti theft car keys, automated highway tollbooths and so on. In retail marketplace, RFID finds its use in the continuous live store inventory and simultaneous one shot scanning of goods at the cash. In continuous live store inventory, the retailers can gain a detailed information of the stock with the help of an automatic scanning system in the store as well as in the warehouse. This process of inventory management is proven more efficient than manual checking of the inventory sales (Bhattacharya, 2012). RFID technology is implemented in health care as well in order to reduce the medical errors. It helps in retrieving patients information and real time monitoring of the patients location in the hospital. Implementing innovative technology such as RFID has considerably helped the healthcare in eliminating the risks associated with the improper patient monitoring, poor patient tracking and inability to respond to the patients more quickly (Manzoor 2016). The use of RFID tags helps the banking sector in providing enhanced services to its customers. A bankcard with an embedded RFID chip is now offered to the customers that can be used for making payment without the need for swiping the card or entering a PIN (Azari, Jassbi Reshadi, 2011). Conclusion Therefore, from the above discussion, it can be concluded that RFID is widely used in different business sectors. The use of RFID tags makes the process of inventory and supply chain management even easier. The working principal of the RFID technology and the use of this technology in various fields are elaborated in this report. The report discusses the use of RFID in Walmart and in the business of various other sectors as well, which includes retail, healthcare and banking. The report gives an overview of the use of RFID technology. References Azari, S., Jassbi, S. J., Reshadi, M. (2011) RFID Technology in Bank Services. institutions, 4(5), 6 Barrera, J. F., Mira, A., Torroba, R. (2013). Optical encryption and QR codes: secure and noise-free information retrieval.Optics express,21(5), 5373-5378. Bhattacharya, M. (2012). Impact of RFID on the retail value chain: An exploratory study using a mixed method approach. Journal of technology management innovation, 7(4), 36-49. Dwivedi, Y. K., Kapoor, K. K., Williams, M. D., Williams, J. (2013). RFID systems in libraries: An empirical examination of factors affecting system use and user satisfaction.International Journal of Information Management,33(2), 367-377. Expsito, I., Cuias, I. (2013). Exploring the limitations on RFID technology in traceability systems at beverage factories.International Journal of Antennas and Propagation,2013. Jia, X., Feng, Q., Fan, T., Lei, Q. (2012, April). RFID technology and its applications in Internet of Things (IoT). In Consumer Electronics, Communications and Networks (CECNet), 2012 2nd International Conference on (pp. 1282-1285). IEEE. Manzoor, A. (2016). RFID-Enabled Healthcare. International Journal of Information Communication Technologies and Human Development (IJICTHD), 8(2), 26-46. Shin, S., Eksioglu, B. (2014). Effects of RFID technology on efficiency and profitability in retail supply chains. Journal of Applied Business Research, 30(3), 633. Zhong, R. Y., Huang, G. Q., Lan, S., Dai, Q. Y., Chen, X., Zhang, T. (2015). A big data approach for logistics trajectory discovery from RFID-enabled production data. International Journal of Production Economics, 165, 260-272. Zhu, X., Mukhopadhyay, S. K., Kurata, H. (2012). A review of RFID technology and its managerial applications in different industries.Journal of Engineering and Technology Management,29(1), 152-167.